Hilti TE 30-A36 Manual De Instrucciones página 23

Quick-release chuck
2.3 Switches
Speed control switch for smooth starting.
Forward / reverse switch
Function selector switch:
Drilling without hammering
en
Hammer drilling
Chisel adjustment (12 positions)
Chiseling
2.4 Grips
Pivotable side grip with depth gauge
Vibration-absorbing grip
2.5 Protective features
Mechanical slip clutch
2.6 ATC (Active Torque Control)
Electronic quick switch-off
2.7 Lubrication
Oil lubrication
2.8 Additional items required for operating the tool
A B36/6.0 Li‑Ion battery and a C4/36‑90 or C4/36‑350 battery charger.
NOTE
The C4/36‑350 charger is recommended. The charging time is longer when the battery is charged with the other
charger.
2.9 Items supplied as standard
1 Power tool
1 TE‑C chuck
1 Side handle with depth gauge
1 Operating instructions
1 Hilti cardboard box or toolbox
1 Cleaning cloth
1 Grease
2.10 Li‑ion battery charge status
LEDs light constantly
LED 1,2,3,4
LED 1,2,3
LED 1,2
LED 1
-
NOTE
Indication of the charge status is not possible while the power tool is in operation or immediately after operation. If the
battery charge status LEDs flash, please refer to the information given in section 9. "Troubleshooting".
18
LEDs blink
-
-
-
-
LED 1
Charge status C
C ≧ 75 %
50 % ≦ C < 75 %
25 % ≦ C < 50 %
10 % ≦ C < 25 %
C < 10 %