Maintenance; Service; Replacement Parts; Free Warning Label Replacement - Delta 50-767 T2 Manual De Instrucciones

To reduce the risk of injury, turn unit off and disconnect it from power source before installing and
removing accessories, before adjusting or when making repairs. An accidental start-up can cause personal
injury.
KEEP MACHINE CLEAN
Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp
cloth.
NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the
material. Wear certified safety equipment for eye, hearing and respiratory protection while using
compressed air.
FAILURE TO START
Should your machine fail to start, check to make sure the prongs on the cord plug are making good contact in the
outlet. Also, check for blown fuses or open circuit breakers in the line.

REPLACEMENT PARTS

Use only identical replacement parts. For a parts list or to order parts, visit our website at www.DeltaMachinery.com/
service. You can also order parts from your nearest factory-owned branch, Authorized Warranty Service Center or by
calling Technical Service Manager at 1-800-223-7278 to receive personalized support from one of our highly-trained
representatives.

FREE WARNING LABEL REPLACEMENT

If your warning labels become illegible or are missing, call
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For information about DELTA
Equipment Corporation, its factory-owned branches, or to locate an Authorized Warranty Service Center, visit our
website at www.DeltaMachinery.com or call our Technical Service Manager at 1-800-223-7278. All repairs made by our
service centers are fully guaranteed against defective material and workmanship. We cannot guarantee repairs made or
attempted by others. By calling this number you can also find answers to most frequently asked questions.
You can also write to us for information at DELTA
Spartanburg, SC 29303 - Attention:
Technical Service Manager. Be sure to include all of the information shown on the nameplate of your tool (model number,
type, serial number, date code, etc.)

MAINTENANCE

SERVICE

1-800-223-7278
®
Power Equipment Corporation, 2651 New Cut Road,
18
for a free replacement.
®
Power