Cassette Operation; Programmed Play - AEG MC 4403 CD Instrucciones De Servicio

Description of the CD buttons
/II CD play/pause
button (13/E): You can briefl y interrupt and
resume playback using this button.
The word „PLAY" fl ashes in the
display.
I / I (15/16-C/D): When the CD is playing:
With
the next or previous track etc.
If the button is kept pressed down,
the machine starts to search
through the tracks.
The I
as follows:
Press once = This starts the current
track again from the beginning.
Press a second time = This jumps
back to the previous track.
Press a third time = This plays the
song before etc. If the button is kept
pressed down, the machine starts to
search through the tracks.
STOP (14/F): the CD stops.
MUTE
(I on the
remote control): This serves to switch off the volume
instantly. The STANDBY control
lamp (2) fl ashes. When you would
like to hear sound again, press the
MUTE button once more.
REPEAT (17/H): Press once („RPT" fl ashes in the
display): the current track is repea-
ted continuously.
Press a second time („RPT" lights
up in the display): the whole CD is
played continuously.
Press a third time: the function is
deactivated.

Programmed Play

This can be used to program any desired sequence of
tracks.
1. Press the STOP key (14/F).
2. Press the PROGRAM/MEMORY key (18/G). The
number „01" (storage location) and the symbol PRG
flash in the display (4). Use the
16-C/D) to select the desired track and then press the
PROGRAM/MEMORY button (18/G) again. The display
changes to memory slot 02.
3. Select the next track with the
C/D) and press the PROGRAM/MEMORY key again.
Repeat the procedure until all the desired tracks are
selected.
4. Press the / II CD play/pause button (13/E). The se-
lected track numbers are shown in the display in the
correct order and the PLAY and PRG symbols light
up. Press this button to pause briefl y the playback.
5. Press once the STOP key (14/F) to stop the play-
back while retaining the program. „PRG" lights up in
the display.
6. To play back the program again, please press the
/ II button (13/E).
7. To delete the program, press the
twice. The PRG control lamp goes out.
34
5....-05-MC 4403 CD 34
I (15/C) you can jump to
button (16/D) can be used
I / I buttons (15/
I / I key (15/16-
STOP key (14/F)
The device stops automatically once the entire sequence
of programmed tracks is completed. The programmed
order of tracks remains in the memory until you change
to a different mode, remove the CD from the CD com-
partment or switch off the device. In order to play the
programmed sequence again, press the
It is also possible to combine the programmed tracks
with the REPEAT function. After you have programmed
and started the device, please press the REPEAT button
(17/H) up to three times and then you can use the func-
tions as described under „REPEAT".

Cassette Operation

Playing Cassettes
1. Select the function TAPE (7).
2. Open the fl ap (20) and then press it downwards until
it locks in place.
3. Press the / Stop/Eject button (22) in order to
open the cassette compartment (19).
4. Push a recorded audio cassette, with the tape down-
wards and the listening side facing forwards, into the
compartment. Close the cassette compartment.
5. Press the playback key (25) to listen to the tape.
6. With the í/
stop/eject key (22) you can stop play-
back.
7. Wind the tape forwards or backwards if necessary in
the direction of the arrow keys.
= forwards (23), = reverse (24).
Always press the í/
stop/eject key (22) when
changing the direction or stopping the tape. This
prevents damage to the machine and the tape.
8. If the í/
stop/eject button is pressed again the fl ap
of the cassette compartment opens.
9. In order to interrupt playback briefl y, press the
II PAUSE button (21). Pressing again continues
playback.
Recording Cassettes
1. Insert an audiocassette with the side on which you
wish to record facing forwards. Ensure that the cas-
sette is not copy-protected (the copy protection tab
on the top narrow side of the cassette must not have
been removed).
2. Select the source from which you wish to record with
the function switch (7) and then start playback from
this source if necessary. The sound source which you
are listening to is the one from which the recording is
made. The recording level is controlled automatically.
Any changes to the sound and volume do not affect
the recording.
3. Please press the b record button (26) (the
playback button is automatically pressed down at
the same time). Recording now begins. All previous
recordings are automatically erased.
4. The recording can be interrupted briefl y using the
II pause key (21), or stopped by means of the
stop/eject button (22).
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibili-
ty and low voltage directives, and has been constructed
in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
/ II key (13/E).
/
23.08.2004, 10:35:22 Uhr