Unpacking And Contents Verification; Installation Suggestions - Ceasa OSMOTIC Manual De Instrucciones

2. UNPACKING AND CONTENTS VERIFICATION

Remove the equipment from its packaging and verify that it contains the following items. Before any use
check the box and components to make sure they have not been damaged during its transportation.
Any claim resulting from damages during handling must be enclosed by the transport company's
name and the transporter must be informed within a maximum of 24 hours after having received the
merchandise.
Description
OSMOTIC
Osmosis membrane, properly protected
(Check the original spare parts bag)
Dispensing faucet with ceramic closure
Entry valve
Installation kit with connections
White PE tube 5/16"
Black PE tube 1/4"
Red PE tube 1/4"
Pressure reducer
Remove plastic bags as they can be dangerous for children.

3. INSTALLATION SUGGESTIONS

Besides the installation notes the following indications should be considered:
-Choose an appropriate place for the system placement, on a flat surface and protected from direct
solar radiation, rain or humidity. In its proximity there should be a water supply, a drain output and an
electric connection.
-It is recommended to install an entry valve at the system water inlet in order to make maintenance
easier.
-The system must not be started if it has not been previously connected to the water main.
-The system is designed to operate with water temperatures between 4°C and 45°C. Do not install the
system using a hot water input.
-The system must be placed as shown in the pictures. In no case should it be placed on its side.
-Is mandatory to use the pressure reducer in the input when water pressure is fluctuating.
- When the entry valve is closed, do not forget to switch off the equipment. This will prevent the valve
from overheating.
Quantity
1 un.
1 un.
1 un.
1 un.
1 un
2 meters
2 meters
2 meters
1 un.
51