Additional Safety Warnings; Standard Accessories - Hitachi W 6VM Instrucciones De Manejo

SCREW DRIVER SAFETY WARNINGS
○ Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring or its own cord.
Fasteners contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.

ADDITIONAL SAFETY WARNINGS

1. Ensure that the power source to be utilized conforms
to the power requirements specifi ed on the product
nameplate.
2. Ensure that the power switch is in the OFF position.
If the plug is connected to a receptacle while the power
switch is in the ON position, the power tool will start
operating immediately, which could cause a serious
accident.
3. When the work area is removed from the power source,
use an extension cord of suffi cient thickness and rated
capacity. The extension cord should be kept as short as
practicable.
4. Ensure that the Screw Driver is held truly perpendicular
to the head of the screw.
If held at an angle, the driving force will not be fully
transferred to the screw, and the screw head and/or hex-
socket will be damaged. Hex-socket rotation stops when
pushing force is released.
5. Never change the direction of hex-socket (or bit holder)
rotation while the motor is running. To do so would
seriously damage the motor. Turn the power switch
OFF before changing the direction of hex-socket (or bit
holder) rotation.
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
W6VM / W6V4 / W6VA4 / W6VB3 / W8VB2 :
Screw Driver
Read all safety warnings and all instructions.
SPECIFICATIONS
Model
Voltage*
Power input
No load speed
Capacity
Bit shank size
Weight (without cord)
* Be sure to check the nameplate on product as it is subject to change by areas.
NOTE
Due to HITACHI's continuing program of research and development, the specifi cations herein are subject to change
without prior notice.
W6VM W6V4
(110 V, 120 V, 127 V, 220 V, 230 V, 240 V)
0 – 6000 min 0 – 4500 min
–1
1.4 kg
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/
EC on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
V
Rated voltage
P
Power Input
n
No-load speed
0
Switching ON
Switching OFF
On / Off switch lock-on
Disconnect mains plug from electrical outlet
Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package
contains the accessories listed in the below.
○ No. 2 Plus bit (W6VM, W6V4, W6VA4) ........................1
○ Magnetic hex socket (H= 10 mm) (W6VB3, W8VB2) ...1
Standard accessories are subject to change without notice.
APPLICATIONS
○ Tightening hex-head screws.
○ Tightening drywall screws, wood screws and self-drilling
screws.
W6VA4
620 W
0 – 3000 min
–1 –1
6 mm
63.5 mm Hex.
3
English
W6VB3 W8VB2
0 – 2600 min 0 – 1700 min
–1
8 mm
1.5 kg
–1