Start Washer - Maytag MAV6250AWW Guia Del Usuario

SELECT WATER
TEMPERATURE
Press the appropriate button to select the
wash and rinse temperatures. Follow the
garment care label for best results. Use the
chart at the right as a guide.
REMEMBER: In wash water temperatures
below 650 F, detergents do not dissolvewell
or clean well. Care labels define cold water
as up to 850 E
WASH/RINSE
HOT
COLD
WARM
WARM
WARM
COLD
COLD
COLD
HOT/COLD - White and heavily soiled,
color-fast items
WARM/WARM- Delicateor colorfast items
WARM/COLD - Moderately soiled,
colored items; most wrinkle free items
COLD/COLD - Brightly colored, lightly
soiled items; washable woolens
SELECT A
CUSTOMIZED CYCLE
Press the appropriate button(s) to select
one or more options.
SUPER
WASH
E×TRA
RINSE
4t, n TO
£ r4 _': RATUR8
CANCEL
SUPER WASH - Can be used with any
wash cycle to clean very heavily soiled
items. Provides fast agitation and normal
spin throughout all cycles.
EXTRA RINSE - Provides an additional
rinse at the end of the cycle to more com-
pletely remove laundry additives, suds, pep
fume, etc.
AUTO TEMPERATURECONTROL (select
models) - assures a cold water wash of
75°F and warm water wash of 95°E This
option assures detergent will dissolve and
provide optimum cleaning results.
CANCEL - Press this button to cancel and
reset any of the options.
AUTO
0 TEMPERATURE
CONTROL
If Auto Temperature Control (select
models) is selected with a warm/warm,
warm/cold, or cold/cold water tempera-
ture setting, the light will illuminate dur-
ing the first fill.
PRESOAK
SOAK
ONLY
MAX
EXTRACT
NORMAL
SPIN
PRESOAK:
Provides 12 minutes of agi-
tation and soak before going into the wash
cycle.
SOAK ON LY: Provides three minutesof
agitation and then a soak, then three min-
utes of agitation before an extended soak.
Soak for 30 minutes or less.
MAX EXTRACT:
Provides three extra
minutes of spin to remove more moisture
from loads, such as towels. Can only be
used with the WHITES cycle.
NORMAL SPIN:
Provides
adequate
water removal for most loads.
START WASHER
• Add detergent and any additives
• Add load and close lid
• Pull the control dial out to start
}