Product Description And Specifications; Product Features; Technical Data; Noise/Vibration Information - Bosch PFS 3000-2 Manual Original

20 | English
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is only intended for spraying emulsion and
latex paints, solvent-based and water-dilutable lacquers,
glazes, primers, clear lacquers, oils (ALLPaint) and water.
The power tool is not suitable for spraying caustic solutions,
wood stains, acidic coating materials and house paints.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Spray gun
(2) Air cap
(3) Cap nut
(4) Thumbwheel for spraying capacity
(5) Trigger switch
(6) Lock ring
(7) Container for spray material
(8) Hose port (spray gun)
(9) Nozzle cap (white: For "wall" application)
(10) Nozzle cap (grey: For "wood" application)
(11) Filling sieve
A)
(12) Transfer bucket
(13) Nozzle needle
(14) Container seal
(15) Suction tube
(16) Ventilation hole
(17) Paint channel
(18) Air hose
(19) Bayonet lock
(20) Base unit
(21) Carrying strap
(22) Carrying handle
(23) Pin
(24) Sliding switch for switching on/off and for air flow
control
(25) Air filter cover
(26) Cleaning brush
(27) Elastic band (hose holder)
(28) Hose port (base unit)
1 609 92A 58D | (28.10.2019)
(29) Accessory compartment
(30) Air filter
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Fine-spray system
Article number
Rated power input
Spraying capacity
Required time for application of
2
paint on 2 m
Container capacity for spray
material
Length of air hose
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.

Noise/Vibration Information

Noise emission values determined according to
EN 60745-1.
Typically, the A-weighted sound pressure level of the power
tool is 79 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-1:
2 2
a < 2.5 m/s , K = 1.5 m/s
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
PFS 3000-2
3 603 B07 1..
W 650
ml/min 300
min 1
ml 1000
m 2
kg 3.7
/ II
Bosch Power Tools