Greta
7
Preparing the coffee
7.1
AEPS Version
• Place the coffee cup under the dispensing spout;
• Press the dispensing switch (5). The dispens-
ing will begin, and it can be stopped using the
same switch once the desired amount of coffee
is obtained in the cup.Programming coffee dose
15
14
7.2
SAES Version
Programming
• Fill the filter with a dose of ground coffee and
press it with the special pusher;
• attach the filter holder to the dispenser unit;
• Place the coffee cup under the dispensing spout
(14);
• press the STOP/PROG key for at least 5 seconds
until the LED of the dose keys comes on;
• press the desired dose key (
• wait for the brewing; to confirm the dose, press
the dose button again;
• repeat this operation for the other dose buttons;
Automatic exit from programming after 20 sec-
onds.
When different height cups are being used, there
are special folding trays (15).
32
5
for example);
Stop
Prog.
!
Programming of each dose must be carried out
with ground coffee and not with previously used
grounds
Coffee delivery
• Fill the filter with a dose of ground coffee and
press it with the special pusher;
• attach the filter holder to the dispenser unit;
• put the cup under the dispensing spout (14);
• press the desired dose key (
• To stop dispensing ahead of time, press the
STOP/PROG key or the dose key again.
!
During the coffee brewing, do not remove the filter
holder from the group.
for example);
Stop
Prog.
User manual