Figure
25
To open
- turn counterclockwise.
Figure
26
3.
4.
Lift out the assembly
as shown
in Figure 26.
Carefully
examine
the assembly.
If you find debris
in the Large Object
Trap, turn
it
upside-down
and gently
tap it on a surface
such as a countertop
to dislodge
and
remove
the debris.
Flush the Cylinder
Filter clean by holding
it under running
water.
Large Object
Trap/Cylinder
Filter
Figure
27
To Remove
the Fine
Filter:
1. Lift the Fine Filter from
the dishwasher
floor
as shown
in Figure
27 and flush it clean by holding
it under
running
water.
2. Remove
the Micro
Filter (Models
DWHD64C,
DWHD64E)
as shown
in Figure 28 and
flush it clean by holdin
git under running
water.
To reinstall
the filter
system:
1. Return the Fine Filter to its installed
position.
2. Place the Large Object
Trap/Cylinder
Filter Assembly
into its installed
position
in the
dishwasher
floor.
3. Turn the ring handle
clockwise
1/4 turn
until it is locked.
The arrow
on the ring handle
and the arrow
on the Fine Filter should
point to each other, as
shown
by the circle in Figure 29.
4.
Gently
pull the ring handle to ensure
that the assembly
is locked into place.
ATTENTION
To avoid possible
dishwasher
damage,
do not use harsh chemicals,
abrasive
cleaners,
scouring
pads (metal
or plastic),
or abrasive
cloths/paper
towels to clean your dish-
washer's
exterior
door panel. Your dishwasher's
exterior
door panel
can be damaged
by doing so.
Clean the Exterior
Door Panel
Colored
Doors
Use only a soft cloth that is lightly
dampened
with
soapy water.
Stainless
Steel
Doors
Use a soft cloth with
a non-abrasive
cleaner
(preferably
a liquid
spray) made for cleaning
stainless
steel. For the best results,
apply the stainless
steel cleaner to the cloth,
then wipe
the surface.
Clean
the Door Gasket
and Door Seal
Regularly
clean the door gasket with
a damp
cloth to remove
food
particles
and other
debris.
Also clean the door seal, located
inside the dishwasher
at the bottom
of the door.
Figure 28
Figure 29
(Models
DWHD64C,
DWHD64E)
16
To close - turn clockwise.