Maintenance And Care; Technical Data - Metz MECABLITZ 54 MZ-3 Instrucciones De Manejo

Tabla de contenido

Technical data

15. Maintenance and care

Dati tecnici
Remove any grime and dust with a soft, dry or silicon-
treated cloth. Never use detergents that could damage
Datos técnicos
plastic parts.
Forming the flash capacitor
The flash capacitor incorporated in the flashgun under-
goes a physical change when the flashgun is not swit-
ched on for prolonged periods of time. For this reason it
is necessary to switch on the flashgun for approx. 10
minutes every 3 months. The battery must supply suffi-
cient power for flash-readiness to be indicated within
one minute after the mecablitz was switched on.
16. Technical data
Guide numbers at ISO 100/21°:
In the metric system: 54 In the imperial system: 177
12 auto apertures at ISO 100/21°:
f/1, f/1.4, f/2, f/2.8, f/4, f/5.6, f/8, f/11, f/16, f/22, f/32,
f/45
Flash durations:
• Approx. 1/200th to 1/20,000th sec.
• In M mode approx. 1/200th sec. at full light output
• At 1/2 light output approx. 1/600th sec.
• At 1/4 light output approx. 1/1400th sec.
Sensor measuring angle: approx. 25°
Colour temperature:
Film speed:
Synchronisation:
Approx. number of flashes:
60*
180* with high-capacity alkaline manganese batteries
Recycling time:
• with NiCad batteries (600 mAh)
• with high-capacity alkaline manganese batteries
86
approx. 5600 K
ISO 6 to ISO 6400
low-voltage ignition
with NiCad batteries (600 mAh)
5 sec. (in M mode)*
0,1 . . 5 sec. (in A-/TTL mode)
6 sec. (in M mode)*
0,1 . . 6 sec. (in A-/TTL mode)
*At full light output
Tabla de contenido
loading

Tabla de contenido