K ART NO. INT063 SIZE:148 * 210 mm 13/12/2010
Power supply for parents' unit and baby's unit
Both units can be powered by battery or power adapter.
Do not use both batteries and a power adapter to power the unit(s).
Using battery power
02. Inserting the battery
Place the batteries (power pack for parents' unit) in the battery
compartment. Pay attention to polarity; + and – are denoted
within the battery compartment.
Using the power adapters included in delivery
02. Connecting to the power supply
Plug the adapter into an electrical outlet.
(Note: Choose an outlet as far away from your child as possible
when powering the baby's unit with the power adapter.)
page 14
01. Remove the cover to the battery compartment
Open the battery compartment on the back of the unit. Remove
the safety screw and lift off the cover.
03. Closing the battery compartment
Place the cover over the battery compartment after inserting
batteries and tighten the safety screw
01. Supplying power to the
unit:
Connect the adapter to the unit's
DC electrical socket.
IMPORTANT:
Turn off the unit before changing
batteries.
The parents' unit can be powered
by the power pack 3 AAA batte-
ries, or 3 AAA alkaline batteries.
Do not use a power adapter
or the charging station when
powering the Baby Phone with
alkaline batteries. Contact your
retailer to replace the power pack
included in delivery.
IMPORTANT:
Make sure the units' voltage
and the local power supply
voltage
are congruent.