After Use; Helpful Hints; Service Centre - Grouw 97596 Manual De Instrucciones

6. Fill up bottle with � uid required for
application. DO NOT use hot or boiling
� uids.
7. Insert pickup tube in bottle and screw
sprayer cap onto bottle.
SPRAYING
1. Replace bottle cap with the cap attached
to the sprayer hose.
2. Slide safety lock to the ON position.
3. Gently squeeze the trigger to dispense
� uid. The sprayer may require several
seconds for the � uid to prime.
4. Twist nozzle as necessary to adjust spray
pattern. DO NOT over tighten. Always
slide safety lock to the LOCK position
and point sprayer away from you when
adjusting nozzle.

AFTER USE

1. Empty and clean bottle. Flush sprayer
thoroughly with warm water while
pressing trigger.
2. Slide safety switch to LOCK position.
3. Replace bottle cap.
4. If sprayer will not be used for a long
period of time, remove batteries from
battery hatch and reinstall before use.

HELPFUL HINTS

Can be used with water-based cleaners,
detergents, garden chemicals etc., that are
recommended for spray applications, in strict
accordance with the product label, following
all direction and cautions as speci� ed on the
product label.

Service centre

Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• Open weekdays from 8.00 to 16.00
(Fridays until 15.30)
• http://schou.com/en-gb/service
GB
15