Using The Audio Out Jacks - Sanyo DS19500 Manual Del Propietário

QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors; for right
RED
audio, for left
WHITE
audio and for
YELLOW
video.
A solid Blue screen
with the word Video
displayed means that
the Video/Game is
selected, but no signal
is being detected at
the Video jack.
Position your TV at
least 2 feet from
stereo speakers. The
magnets in the speak-
ers may affect the
picture quality.
Do not connect
external speakers
directly to the TV.
Need help?
visit our website at
www.sanyoctv.com
or Call 1-800-877-5032
10
USING THE FRONT AUDIO/ VIDEO
INPUT JACKS (
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
1. Connect VCR Audio Out (R/L) and Video Out
and Video Input .
For Mono VCR (Single Audio Jack) only connect VCR Audio (L) Out to TV
Audio (L) Input.
2. Press POWER to turn on the TV. Turn on external equipment also.
3. Press the GAME (INPUT) key
from the equipment you have connected to the A/V jacks.
REMOTE CONTROL
POWER
GAME
(INPUT) RESET
MENU RECALL
CH
VOL VOL
CAMCORDER
USING THE AUDIO OUTPUT JACKS
CONNECTING A STEREO AMPLIFIER TO AUDIO OUT JACKS
1. Connect the TV Audio Out (R/L)
2. Press POWER to turn on the TV. Turn on external equipment also.
STEREO AMPLIFIER
Continued)
to the TV Audio Input (R/L)
to select program source: TV signal or signal
TV FRONT A/V
INPUT JACKS
to the Stereo Amplifier In (R/L)
BACK VIEW OF VCR
A/V JACKS
IN
RF
R- AUDIO -L VIDEO
CHANNEL
CH3 CH4
OUT
R- AUDIO -L
VIDEO
.
UHF/VHF/CATV
AUDIO
75Ω
OUTPUT
L
R
BACK OF TV