Using The Audio Output Jacks - Sanyo DS270820 Manual Del Propietário

CONNECTING A SATELLITE SYSTEM AND CABLE TO THE TV
1. Connect signal (cable or antenna) to the TV 75Ω (ohm) terminal
2. Connect Satellite S-Video Out to TV S-Video In jack.
Using the S-Video In jack overrides the Video1 Input jack.
3. Connect the Satellite Audio Out (R/L) jacks to TV Audio Input (R/L) Jacks.
Press POWER key to turn on the TV. Turn on external equipment.
CATV IN
Satellite
CH3
CH4
Receiver
OUT TO TV
Back

USING THE AUDIO OUTPUT JACKS

CONNECTING A STEREO AMPLIFIER TO AUDIO OUT JACKS
1. Connect the TV Audio Output (R/L)
2. Press POWER to turn on the TV. Turn on external equipment.
Note: Cables are not supplied with TV.
Stereo Amplifier
A/V JACKS
OUT S-VIDEO
VIDEO L- AUDIO -R
TV Back
UHF/VHF/CATV
75Ω
AUDIO
AUDIO VIDEO INPUT
OUTPUT
AV2 AV1
VIDEO S-VIDEO
INPUT
(MONO)
L
L L
(MONO)
AUDIO
R
R R
to the Stereo Amplifier In (R/L)
.
IN FROM
SAT.
Cable or Antenna
system
(See page 4.)
.
UHF/VHF/CATV
AUDIO AUDIO VIDEO INPUT
OUTPUT
AV2 AV1
VIDEO S-VIDEO
INPUT
(MONO)
L
L L
(MONO)
AUDIO
R
R R
TV Back
QuickTips
Always match cables
according to the
colors;
RED
audio,
WHITE
audio and
video.
Make sure all cable
connectors are fully
seated on the jacks.
Make sure you select
TV channel to match
your VCR output
(Ch. 3 or 4). See
chart on page 15.
To view two TV
programs or watch a
TV program and pre-
recorded tape at the
same time, follow
steps on page 14.
If you are connecting
your TV to a satellite
dish, you must
connect a cable
system or antenna
with the satellite to
use the PIP feature.
Position your TV at
least 2 feet from
stereo speakers.
The magnets in the
speakers may affect
75Ω
the picture quality.
Do not connect
external speakers
directly to the TV.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
for right
for left
for
YELLOW
13