To Memorize Channels - Panasonic CT-2701 Manual De Usuario

TO MEMORIZE CHANNELS

This TV is equipped with a channel memory feature which
allows channels to skip up or down to the next channel set into
memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into the
TV's memory. In addition to normal VHF and UHF channels,
this TV can receive up to 113 Cable TV channels. To use this
TV with an antenna, set the TV/CATV menu option to the TV
setting. When shipped from the factory, this menu option is in
the CATV setting.
TV/CATV SELECTION
1
Press ACTION and press
select the SET UP mode, then press
ACTION.
2
Press to select MODE mode and
then press . Then press
select the TV or CABLE mode, then
press ACTION.
3
Press ACTION twice.
NOTE:
Contact your cable company to determine the type of cable system
used in your area.
AUTOMATIC CHANNEL MEMORY
1
Press ACTION and press
select the SET UP mode, then
press ACTION.
2
Press twice to select AUTO
PROGRAM mode and then press
. The TV will begin memorizing all
the channels available in your area.
3
Press ACTION twice.
SETTING TIMER
You can set the TV to turn off after a preset amount time.
1
Press ACTION and press
2
Press and then press
After the timer is programmed, the display will disappear then reappear momentarily every ten minutes to remind you the timer function is
operating.
To confirm the timer setting, repeat step 1. The remaining time will be displayed.
To cancel the timer setting, select the OFF.
8
to
PICTURE AUDIO
EXIT
or to LOCK SET UP
SET UP
LANGUAGE/IDIOMA/LANGUE
MODE : TV CABLE
AUTO PROGRAM
MANUAL PROGRAM
CC : OFF
/ /ACTION
to
PICTURE AUDIO
EXIT
LOCK SET UP
SET UP
LANGUAGE / IDIOMA / LANGUE
MODE : CABLE
AUTO PROGRAM
MANUAL PROGRAM
CC : OFF
/ / / ACTION
to select the TIMER mode, then press ACTION.
or to select desired time, then press ACTION.
MANUAL CHANNEL MEMORY
1
Press ACTION and press
the SET UP mode, then press
ACTION.
2
Press twice to select MANUAL
PROGRAM mode and then press .
3
Select the desired channels to be
added or deleted using Direct
Channel Selection (10 keys. 0-9),
CH or .
TIMER 4
or
Press
DELETE.
If an unmemorized channel was
selected (step 3), the channel
indicator will be yellow. Press
if you wish to ADD the
unmemorized channel. The channel
indicator will change from yellow to
blue when a channel is added and
the channel will be memorized.
If a memorized channel was selected (step 3), the channel
indicator will be blue.
Press or
memory. The channel indicator will change from blue to yellow
when a channel is deleted.
Repeat Steps 3 and 4 for each channel to be added or
deleted.
5
Press ACTION three times.
TIMER
to
select
SET UP
LANGUAGE / IDIOMA / LANGUE
MODE
AUTO PROGRAM
MANUAL PROGRAM
CC
to select ADD or
ADD
or
if you wish to DELETE the channel from
TIMER
SLEEP : 10
/ / ACTION
PICTURE AUDIO
TIMER
EXIT
LOCK SET UP
: CABLE
: OFF
/ / / ACTION
CH 012