Additional Safety Rules For Belt Sanders; Additional Safety Rules For Electric Planers; Know Your Product - SPARKY MBS 1100 Instrucciones De Uso

This will ensure that the safety of the power
tool is maintained.
IV - Additional safety rules for
belt sanders
Cutting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an
electric shock.
gles, ear protection, dust mask and protective safety
gloves.
The power tool is guided more securely with both
hands.
of water into the machine increases the risk of an elec-
tric shock.
Damaged sanding belts can tear apart, be
thrown from the machine and injure somebody.
overheating.
sure that it has the right ampere rating for your power
tool and is in safe electrical condition.
the power tool.
accessories could be hot.
work.
switched on and switch the machine off only after it
has been lifted away from the workpiece.
own weight is sufficient for good sanding perfor-
mance. Excessive increase of pressure does not in-
crease sanding capacity, but causes motor overheat-
ing and belt wear.
taining quartz (SiO
2
not process materials containing asbestos.
use a dust extraction system.
the dust bag from the outlet as sparks may ignite the
dust or the bag.
nails and screws from the work before commencing
Original instructions
pages-MBS 1100.indd 5
Penetration
) is dangerous to your health. Do
sanding.
left around the work area.
WARNING: Before connecting a tool to a
power source (mains socket power point receptacle,
outlet, etc.) be sure that the voltage supply is the same
as that specified on the nameplate of the tool. A power
source with a voltage greater than that specified for the
tool can result in serious injury to the user, as well as
damage to the tool.
-
nameplate rating is harmful to the motor.
-
Any use other than those mentioned in this Manual
will be considered a case of misuse. The user and not
the manufacturer shall be liable for any damage or in-
jury resulting from such cases of misuse.
regulations, the assembly instructions and the oper-
ating instructions to be found in this Manual. All per-
sons who use and service the machine have to be
acquainted with this Manual and must be informed
about its potential hazards. Children and frail people
must not use this tool. Children should be supervised
at all times if they are in the area in which the tool is
being used. It is also imperative that you observe the
-
accident prevention regulations in force in your area.
The same applies for general rules of occupational
health and safety.
made to the tool nor for any damage resulting from
-
such changes.
Even when the tool is used as prescribed it is not pos-
sible to eliminate all residual risk factors. The following
hazards may arise in connection with the tool's construc-
tion and design:
worn.
rainy weather, or in moist environment (after rain) or in
close vicinity with easily flammable liquids and gases.
The working place should be well lit.
V – Know your product
Before using the power tool, familiarize yourself with all
-
the operating features and safety requirements.
Use the tool and accessories only for the applications
intended. All other applications are expressly ruled out.
1. Dust collection bag
2. Brush holder cover
3. Mounting holes
4. Electronic speed regulator (MBS 1100E)
6. Belt tension lever
7. Belt rotation direction indicator
5
EN
23.7.2012 г. 15:07:34 ч.