Product Safety Information; Product Specifications; Installation And Lubrication - Ingersoll Rand 105-D2 Manual De Instrucciones

Product Safety Information

Intended Use:
These Air Ratchet Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Ratchet Wrenches Product Safety Information
Manual Form 04580361.
Manuals can be downloaded from www.ingersollrandproducts.com.

Product Specifications

Drive
Model
Size
105-D2 1/4"
105-D3 3/8"
105-L2 1/4"
1105MAX-D2 1/4"
1105MAX-D3 3/8"
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
* K = measurement uncertainty

Installation and Lubrication

Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16571804-2 and table on page 2. Maintenance frequency is shown in
circular arrow and defined as h=hours, d=days, and m=months. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
6. Thread size
7. Coupling
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
45649159_ed2
Free Recommended
Speed Torque Range
rpm ft-lb (Nm)
280 5-20 (7-27)
280 5-20 (7-27)
280 5-20 (7-27)
330 5-25 (7-34)
330 5-25 (7-34)
8. Safety Air Fuse
9. Oil
10. Grease - Inject between ratchet housing and yoke to
lubricate drive bushing.
11. Grease - Disassemble ratchet head and lubricate
components.
12. Grease - Disassemble gearing and lubricate components
Sound Level dB (A)
(ISO15744)
† Pressure (L ) ‡ Power (L
p
81.8 92.8
81.8 92.8
81.6 92.6
88.9 99.9
88.9 99.9
EN
Vibration Level
(ISO28927)
) m/s² *m/s²
w
5.1 0.9
5.1 0.9
3.7 0.9
5.7 1.0
5.7 1.0
EN-1