Connecting The Refrigerator - Waeco CoolMatic CD50 Instrucciones De Montaje

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
CD50, CRD50
➤ Remove the drip-tray (fig. 5 1, page 5).
➤ Connect a hose (fig. 6 2, page 5) to the outlet connections (fig. 6 1,
page 5).
7.2

Connecting the refrigerator

Connect the refrigerator to DC power
The refrigerators can be operated with 12 Vg or with 24 Vg.
A
NOTICE!
To avoid voltage drops and loss of performance, keep the cable
as short as possible and avoid joins.
For this reason avoid additional switches, plugs or multi-way
adapters.
➤ Determine the required cross section of the cable in relation to the cable
length according to fig. 7, page 5.
Key for fig. 7, page 5
Co-ordinate axis
l
A
NOTICE!
Make sure that the polarity is correct.
➤ Before starting up the appliance for the first time, check whether the
operating voltage and the battery voltage match (see type plate).
➤ Connect the refrigerator
– as directly as possible to the poles of the battery or
– to a 12 or 24 Vg socket.
Fit a fuse in the positive wire of 15 A (for 12 V) or 7.5 A (for 24 V)
(fig. 8 1, page 6).
➤ Connect the red cable (fig. 8 rt, page 6) to the positive terminal of the
battery.
➤ Connect the black cable (fig. 8 sw, page 6) to the negative terminal of
the battery.
EN
Installing and connecting the refrigerator
Explanation
Cable length
Cable cross section
Unit
m
mm²
37
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Coolmatic crd50

Tabla de contenido