Cleaning And Care; Defrosting - Unold 48986 Instrucciones De Uso

ECO or rapid cooling function
17. Press the SET button again briefly to select between ECO mode (energy
saving) or HH mode (rapid cooling function). Use the + and - buttons to
switch between the two settings. The quick cooling function is set at the
factory.
Fahrenheit or Celsius
18. If you press the SET button again, you can switch between the temperature
display in Fahrenheit or Celsius. Use the + and - buttons to switch between
the two settings.
19. Note: After 10 seconds without button input, the appliance exits the advan-
ced settings. If you want to make additional settings, press the SET button
again for at least 3 seconds. The settings made are also saved when the
appliance is switched off.

CLEANING AND CARE

Before cleaning, always turn off the appliance and unplug it from the elec-
trical outlet.
1. Never immerse the appliance in water or other liquids.
2. Do not use scratching sponges, abrasive cleaners, steel wool, metallic
objects, hot detergents or disinfectants, as these items can cause damage.
3. Wipe-off the inside and outside of the appliance with a damp cloth. Dry
thoroughly afterwards.

DEFROSTING

Before defrosting, always switch off the appliance and remove the plug from
the electrical outlet.
1. Regular defrosting helps to save energy, since evaporated water freezes on
the inside walls of the appliance and thus reduces the cooling capacity.
2. Switch off the appliance and disconnect it from the mains supply.
Stand 9.3.2020
Copyright UNOLD AG | www.unold.de
DE
EN
FR
NL
IT
ES
PL
33 von 116