The refrigerant (R600a) is contained within the refrigerant
circuit of the appliance, a natural gas with a high level of
environmental compatibility, which is nevertheless flammable.
During transportation and installation of the appliance, ensure
that none of the components of the refrigerant circuit becomes
damaged. The refrigerant (R600a) is flammable.
If the refrigerant circuit should be damaged:
Avoid opening flames and sources of ignition.
Thoroughly ventilate the room in which the appliance is
situated.
THE IDEAL LOCATION
1.
The appliance is operated with a maintenance-free compressor and there-
fore requires sufficient space.
2.
When operating the device, maintain an adequate distance to walls, other
objects, etc. There must be a distance of at least 5 cm on both sides and a
distance of at least 10 cm at the rear.
3.
Wait at least 10 minutes after transporting the appliance before placing it
in service (6 hours after the first transport).
4.
Only place the appliance in service, when it is standing on a stable surface
and the respective electrical socket is easily accessible.
5.
The appliance can be used in vehicles or in camping areas. Nevertheless, it
must be protected from moisture, wetness and weather effects.
6.
The appliance is not a built-in appliance and must not be installed in cabi-
nets or other fixtures.
7.
If the appliance must be transported, always carry it by both handles, kee-
ping it as horizontal as possible, so that the compressor is not damaged.
Due to its weight, we recommend that two persons always carry the appli-
ance to avoid any injuries or appliance damage.
Stand 9.3.2020
Copyright UNOLD AG | www.unold.de
DE
EN
FR
NL
IT
ES
PL
27 von 116