Solving Problems - Unold 48986 Instrucciones De Uso

DE
3. Open the lid and remove the refrigerated and frozen items (place in another
refrigerator or freezer if necessary).
EN
4. Wait until the ice has melted and then remove it with a clean cloth.
FR
5. Note: Do not use sharp or pointed objects such as knives to remove ice
faster. The inner walls of the appliance can be damaged if sharp or pointed
NL
objects are used to remove ice.
IT
6. When the appliance is completely dry, you can use it again as usual.
ES

SOLVING PROBLEMS

PL
Problem
The appliance does
not work, indicator
lights are off
Noise development
Loud, metallic
knocking or beeping
Appliance runs for
a short time and
then trips the earth
leakage circuit
breaker
34 von 116
Copyright UNOLD AG | www.unold.de
Possible cause
No power supply
Insufficient power
supply
AC power cord
12 V DC power cord
The appliance is not
standing on a level
surface
Device has been
excessively tilted
Compressor is defective
The power outlet does
not provide the required
voltage
Solution
Check all connections and
power cord connections.
Connect the appliance to
another electrical outlet.
Check the earth leakage
circuit breaker.
Connect another suitable
power cord.
Connect another suitable
power cord or connect the
appliance to another 12 V
connection.
Note: A certain amount
of noise is normal. If the
appliance is at an angle,
place it on a flat surface.
Switch off and leave on a
level surface for 24 hours,
then switch it on.
Contact customer service.
Have the electrical outlet
checked by a specialist.
Stand 9.3.2020