Mettler Toledo Panda7 Instrucciones De Manejo página 10

Paint Scale Panda7, Panda7/X, Panda7/X2
10
Locking the keyboard
To lock the keyboard, press the «O/T» and «+» keys simultaneously for at least 2 seconds. This locks all the keys except
the «O/T» key. If the scale has a display, "key locked" appears briefly. This message also appears if a key is pressed
while the keyboard is locked.
Unlocking the keyboard
To unlock the keyboard, press the «O/T» and «–» keys simultaneously for at least 2 seconds. If the scale has a display,
"key unlocked" appears briefly.
Setting the scale to PS7001 standard settings
To operate your Panda7 scale with the settings of a PS7001 scale, press the «Unit» and «Last Comp» keys
simultaneously for at least 2 seconds. If the scale has a display, "PS7001-F" appears briefly. The scale then operates
with the same standard settings as a PS7001 scale.
Note: You can change the scale settings back again whenever you wish (see Chapter 6, "Master Mode") or you can
reset the scale to the factory settings (see next paragraph).
Resetting the scale to the factory settings
To reset the scale to the factory settings, press the «Unit» and «–» keys simultaneously for at least 2 seconds. If the
scale has a display, "factory set" appears briefly. The scale then operates with the factory settings.