Operating Pressure; Tool Specifications - Bostitch BT1855 Manual De Operación Y De Mantenimiento

All dimensions in inches unless otherwise specified.
Description
Engine Type
Operation Pressure Range
Maximum Operation Pressure
Fastener Type
Fastener Gauge
Fastener Range
Magazine Capacity
Length
Width
Height
Weight

Operating Pressure:

70 to 120 p.s.i.g. (4.9 to 8.43 kg/cm
performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
Air Consumption:
The BT1855 and SX1838 require 2.83 cubic feet per minute or C.F.M. (80.1 liters per minute or LT/MIN)
of free air at 80PSI (5.6 kg/cm
appropriately sized air compressor, take the actual rate at which the tool will be run and compare the
required C.F.M. (LT/MIN) to the compressors free air delivery (C.F.M./ LT/MIN) at 80 PSI (5.6 kg/cm
For example, if your fastener usage averages 30 fasteners per minute, you need 50% of the tools C.F.M.
required to operate the tool at the rate of 60 fasteners per minute. In this case, be sure that your air
compressor can deliver a minimum of 1.42 C.F.M. (40.2 LT/MIN) at 80 PSI(5.6 kg/cm
performance.
Tool Model Fastener Type
BT1855
Brads
SX1838
Staples
* Stainless steel fasteners also available in certain sizes. Visit www.BOSTITCH.com for further details.
NOTE:
BOSTITCH tools have been engineered to provide superior customer satisfaction and are designed to
achieve maximum perfomance when used with precision BOSTITICH fasteners engineered to the same
exacting standards. BOSTITCH cannot assume responsibility for product performance if our tools are
used with fasteners or accessories not meeting the specific requirements established for genuine
BOSTITCH fasteners and accessories.
BT1855
18ga Brad Nailer
Oil-Free
70-120 PSI (4.9 to 8.43kg/cm
120 PSI (8.43 kg/cm
BT13XX Series
18 Gauge
5/8" - 2-1/8"(15mm-55mm)
100
9-1/4" (235mm)
2-3/4" (69.9mm)
9-1/2" (241.3mm)
2.7lbs. (1.2kg)
2 ). Select the operating pressure within in this range for best fastener
2
) to operate at a rate of 60 fasteners per minute. To determine the
Fastener SKU Crown Width
BT1300
BT1303
BT1309
BT1332
BT1338
BT1345
BT1350
BT1355
SX50351/2G
SX50355/8G
SX50353/4G
SX50351G
SX50351-1/8G
SX50351-3/16G
SX50351-1/4G
SX50351-3/8G
SX50351-1/2G
-5-

TOOL SPECIFICATIONS

18ga Finishing Stapler
2 ) 70-120 PSI (4.9 to 8.43 kg/cm
2 ) 120 PSI (8.43 kg/cm
1/2" -1-1/2" (12mm-38mm)
FASTENER SPECIFICATIONS
Gauge
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
7/32"
7/32"
7/32"
7/32"
7/32"
7/32"
7/32"
7/32"
7/32"
SX1838
Oil-Free
2 )
SX5035 Series
18 Gauge
100
9-1/4" (235mm)
2-3/4" (69.9mm)
9-1/2" (241.3mm)
3.0lbs. (1.36kg)
2
).
2 ) for optimum
Length
18 5/8" (15mm)
18 3/4" (19mm)
18 1" (25mm)
18 1-1/4" (32mm)
18 1-1/2" (38mm)
18 1-3/4" (45mm)
18 2" (50mm)
18 2-1/8" (55mm)
18 1/2" (12mm)
18 5/8" (15mm)
18 3/4" (19mm)
18 1" (25mm)
18 1-1/8" (28mm)
18 1-3/16" (30mm)
18 1-1/4" (32mm)
18 1-3/8" (35mm)
18 1-1/2" (38mm)
2 )