Safety Rules - Poulan Pro PPB4014 Manual De Instrucciones

WARNING:
WARNINGS AND ALL INSTRUCTIONS.
Failure to follow all instructions listed below
may result in electric shock, fire and/or
serious personal injury.
WARNING:
device, safety precautions must be
followed. For your own safety and that of
bystanders, please read these instructions
before operating the device. Do not use the
device without reading the instruction manual.
Please keep the instruction manual safe for
later use.
WORK AREA SAFETY
• Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
• Do not operate chainsaw in explosive
atmospheres, such as in the presence
of flammable liquids, gases, or dust.
Chainsaws create sparks which may ignite
the dust or fumes.
• Keep all children, bystanders, visitors,
and animals out of the work area while
starting or cutting with the chainsaw.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
• Do not expose the chainsaw to rain or
wet locations. Water entering a chainsaw
will increase the risk of electric shock.
• A battery-operated tool with integral
batteries or a separate battery pack
must be recharged only with the
specified charger for the battery. A
charger that may be suitable for one type of
battery may create a risk of fire when used
with another battery.
• Use a battery-operated tool only with
specified battery pack. Use of any other
batteries may create a risk of fire.
• If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and
use common sense when operating a
chainsaw. Do not use a chainsaw while
you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating chainsaws
may result in serious personal injury.

SAFETY RULES

READ ALL SAFETY
When using this
• Use safety equipment. Always wear eye
protection. Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
• Avoid accidental starting. Carrying power
tools with your finger on the switch or
plugging in power tools that have the switch
on invites accidents.
• Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the chainsaw may result in personal
injury.
• Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the chainsaw in unexpected
situations.
• Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
these devices can reduce dust-related
hazards.
POWER TOOL USE AND CARE
• Do not force the chainsaw. Use the
correct chainsaw for your application.
The correct chainsaw will do the job better
and safer at the rate for which it was
designed.
• Do not use the chainsaw if the switch
does not turn it on and off. Any chainsaw
that cannot be controlled with the switch is
dangerous and must be repaired.
• Disconnect the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of starting
the power tool accidentally
• Store idle chainsaws out of the reach
of children and do not allow persons
unfamiliar with the chainsaw or these
instructions to operate the chainsaw.
Chainsaws are dangerous in the hands of
untrained users.
• Maintain chainsaws. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the chainsaw's
operation. If damaged, have the chainsaw
repaired before use. Many accidents are
caused by poorly maintained chainsaws.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
5