Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6.
DO NOT EXCEED 120 psi. (8.3 bar 8.5 kgf/cm
7.
ALWAYS WEAR EAR AND HEAD PROTECTION.
Always wear ear protection to protect your ears from loud noise.
Always wear head protection to protect your head from flying objects.
8.
STORE STAPLER PROPERLY.
When not in use, the Stapler should be stored in a dry place. Keep out of reach of
children. Lock the storage area.
9.
KEEP WORK AREA CLEAN.
Cluttered areas invite injuries. Clear all work areas of unnecessary tools, debris, furniture,
etc.
10. NEVER USE IN PRESENCE OF FLAMMABLE LIQUIDS OR GASES.
The Stapler produces sparks during operation.
Never use the Stapler in sites containing lacquer, paint, benzine, thinner, gasoline,
gases, adhesive agents, and other materials which are combustible or explosive.
11. KEEP VISITORS AWAY.
Do not let visitors handle the Stapler.
All visitors should be kept safely away from work area.
12. DRESS PROPERLY.
Do not wear loose clothing or jewelry as they can be caught in moving parts.
Rubber gloves and nonskid footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.
13. NEVER USE NON RELIEVING COUPLER ON STAPLER.
If a non relieving coupler is used on the Stapler, the Stapler can remain charged with
air after disconnecting and thus will be able to drive a fastener even after disconnecting.
The Stapler and air hose must have a hose coupling such that all pressure is removed
from the Stapler when the coupling joint is disconnected.
14. CHECK PUSH LEVER BEFORE USE.
Make sure the push lever operates properly. (The push lever may be called "Safety".)
Never use the Stapler unless the push lever is operating properly, otherwise the Stapler
could drive a fastener unexpectedly. Do not tamper with or remove the push lever,
otherwise the push lever becomes inoperable.
15. KEEP ALL SCREWS AND COVERS TIGHTLY IN PLACE.
Keep all screws and covers tightly mounted. Check their condition periodically.
Never use the Stapler if parts are missing or damaged.
SAFETY
WARNING
Do not exceed maximum recommended air
pressure 120 psi (8.3 bar 8.5 kgf/cm
Never connect the Stapler to pressure which
potentially exceeds 200 psi (13.7 bar 14 kgf/cm
as the Stapler can burst.
— Continued
2
)
English
2
).
2
)
5
Tabla de contenido
