Display Backlight; Hold / Peak Hold - Beta 1760/OHM Manual Del Usuario Y Operador

disPlaY backliGHt

Press the key to turn the backlight on. The backlight will automatically turn off after SET time.
Press the EXIT button to exit the backlight on mode.
Hold
The hold function freezes the reading on the display. Press the Hold key momentarily to activate
or to exit the Hold function.
Peak Hold
The Peak Hold function captures the peak AC or DC voltage or current. The meter can capture
negative or positive peaks as fast as 1 millisecond. Briefly press the Peak button, "Peak"
and "maX" will display in lH auxiliary display. min" will display in rH auxiliary display.
The meter will update the value on display each time a lower negative peak occurs. Press the
EXIT button to exit the PEAK HOLD mode. In this mode, Auto Power Off feature will be
disabled automatically.
81