Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1.
Place the cuff on the arm that will be used for the measurement (preferably
the left arm).
2.
Press the START/STOP switch.
•
When the START/STOP switch is pressed, all of the display symbols will
appear for about one second.
•
When the "0" is displayed, the device is calibrating its zero point. If there is
still some air in the arm cuff, it will be exhausted at this time.
•
The micro pump will pressurize the cuff.
Note: The cuff will become very tight. Do not be alarmed, as this is
normal.
•
If the START/STOP switch is pressed again during pressurization or
during the measurement, the pump will stop and the air will be released
from the cuff.
3.
When pressurization has completed, the automatic exhaust mechanism will
gradually reduce the pressure in the cuff and the Measurement in Progress
symbol will appear along with the current pressure reading. This symbol will
flash in unison with the pulse of the person being monitored.
Measurements
ENGLISH 6
Measurement in
Progress
Tabla de contenido
