Mount The Oven - GE JVM7195 Manual De Instalación

B5

MOUNT THE OVEN

CAUTION:
IMPORTANT: Do not grip or use handle during
installation.
WARNING:
power supply cord hole with the power supply cord
IMPORTANT: If filler blocks are not used, case damage
may occur from overtightening screws.
NOTE: When mounting
the microwave, thread
power cord through hole
in bottom of top cabinet.
Keep it tight throughout
Steps 1–3. Do not pinch
cord or lift oven by pulling
cord.
Rotate front of oven up
2
against cabinet bottom.
3
Insert a self-aligning screw through top-center
cabinet hole. Temporarily secure the oven by
turning the screw at least two full turns after
the threads have engaged. (It will be completely
tightened later.)
Installation Instructions
1 Lift microwave, tilt it
forward, and hook slots
at back bottom edge
onto four lower tabs of
mounting plate.
Cabinet Front
Cabinet Bottom Shelf
Oven Top
4 Attach the oven to the top cabinet.
5 Insert 2 self-aligning screws
(
1 4
top cabinet holes. Turn two full
turns on each screw.
6 Tighten the outer two screws to the top of the
oven. (While tightening screws, hold the oven
in place against the wall and the top cabinet.)
7 Install grease filters. See the Owner's Manual
packed with the oven.
18
Filler Block
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
-28 x ) through outer
This distance
can NOT
exceed 2"
to ensure
proper
installation