How To Assemble Your Ceiling Fan - Fanimation The Mariano FP7930PWW-220 Manual Del Propietário Y Guía

How to Assemble Your Ceiling Fan

1. Remove the hanger ball portion from the
downrod/hangerball assembly by loosening the set
screw in the hanger ball until the ball falls freely
down the downrod. Remove the pin from the
downrod, then remove the hanger ball. Retain the
pin and hanger ball for reinstallation in Step 6
(Figure 1).
2. Remove the hairpin clip and clevis pin from the
bottom of the downrod. Retain the pin and clip for
reinstallation in Step 4 (Figure 2).
3. Loosen the two set screws in the downrod support.
Route blue, brown and orange lead wires through
the downrod (Figure 3).
4. Position downrod support and align the clevis pin
holes in both parts. Install the clevis pin and secure
with the hairpin clip. Tighten the two set screws
and locking nuts in the downrod support (Figure 4).
5. Route wires through motor coupling cover, canopy
screw cover and canopy (Figure 5).
DOWNROD
SET SCREW
HAIRPIN
CLIP
DOWNROD SUPPORT
CLEVIS PIN
HAIRPIN CLIP
6
PIN
HANGER BALL
Figure 1
CLEVIS PIN
Figure 2
BLUE, BROWN AND
ORANGE LEADS
DOWNROD
SET SCREWS
AND LOCKING
NUTS (2)
Figure 3
SET SCREWS AND
LOCKING NUTS (2)
Figure 4
CANOPY
CANOPY COVER
MOTOR COUPLING
COVER
Figure 5