Cleaning And Storage; Technical Data; Guarantee - Clatronic BS 1256 Instrucciones De Servicio

Cleaning and storage

Cleaning
• Pull the plug out of the socket before cleaning!
•
Clean the casing with a dry cloth.
• Clean the motor protection fi lter approximately every 3.
time the vacuum cleaner is emptied. Clean the fi lter in hot
water without additives. Put it back into place only once it is
completely dry.
Storage
• Let the iron cool down completely.
• Wind the cable completely.
• If you position the device horizontally: Please insert the hook
of the fl oor nozzle into the parking assistant on the rear of
the device.
• If you position the device vertically: Please insert the hook of
the suction tube into the parking assistant on the bottom of
the device.
Troubleshooting
Malfunction Possible Causes
When the on/off The device does
switch is pressed not have any
the device does power supply.
not switch on.
The device cannot The batteries are
be switched on fl at.
by means of the
remote control.
The suction power There is something
is too low. blocking the
suction tube.
The installed dust
container is not
properly closed.
The dust container
is full.
Whistling noises This is not a fault.
during the fi rst Noises no longer
hours of operation. audible after some
time.

Technical Data

Model:...............................................................................BS 1256
Power supply:................................................220-240 V, 50/60 Hz
Power consumption:
P :............................................................................ 1800 W
nom.
P :............................................................................2300 W
max.
Protection class:.......................................................................... ΙΙ
05-BS 1256 41
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
The device supplied by our Company is covered by a 24 month
guarantee starting on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its
accessories ascribable to material or manufacturing defects will
be eliminated free of charge by repairing or, at our discretion, by
replacing it. The guarantee services do not entail an extension
of the life of the guarantee nor do they give rise to any right to a
new guarantee!
Proof of the guarantee is provided by the proof of purchase.
Without proof of purchase no free replacement or repair will be
carried out.
If you wish to make a claim under the guarantee please return
the entire machine in the original packaging to your dealer
Remedy
together with the receipt.
Check the socket
with another device Defects to consumables or parts subject to wearing as well as
and insert the cleaning, maintenance or the replacement of said parts are not
covered by the guarantee and hence are to be paid!
mains plug
correctly.
The guarantee lapses in case of unauthorized tampering.
Check the batte-
ries. Replace them
if necessary.
After the expiry of the guarantee repairs can be carried by the
competent dealer or repair service against the payment of the
ensuing costs.
Check the nozzle,
the suction tube
and/or the suction
hose.
Close the dust con-
tainer (see Figure
2 in the table).
Protect our environment: do not dispose of electrical equipment
Check the dust
in the domestic waste.
container and
empty it.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of reutilisati-
on of electrical and electronic equipment.
Information concerning where the equipment can be disposed of
can be obtained from your local authority.

Guarantee

After the expiry of the guarantee
Meaning of the "Dustbin" Symbol
41
04.05.2007, 11:48:34 Uhr