Dmx 512 Connection - TECshow HALO 740 XL Manual De Usuario

MENU button again. Press and hold the MENU but-
ton about one second or wait for about one minute
to exit the menu mode.
4. CONTROL BY UNIVERSAL DMX CONTROLLER

DMX 512 Connection

1. If you using a controller with 5 pins DMX output,
you need to use a 5 to 3 pin adapter-cable.
2. At last unit, the DMX cable has to be terminated
with a terminator. Solder a 120 ohm 1/4W resis-
tor between pin 2(DMX-) and pin 3(DMX+) into a
P. 10
Tecshow Halo 740 XL - English version
3-pin XLR-plug and plug it in the DMX-output of
the last unit.
3. Connect the unit together in a `daisy chain` by
XLR plug from the output of the unit to theinput
of the next unit. The cable can not branched or