TECshow HALO 740 XL Manual De Usuario página 9

to reset pan and tilt to their home positions) or No,
press the ENTER button to store. Press the MENU
button to exit menu mode.
Zoom
To select Zoom, press the ENTER button to show the
ZOOM on the display. Use the UP/DOWN button to
select Yes (the unit will run built-in program to reset
zoom to its home positions) or No, press the ENTER
button to store. Press the MENU button to exit menu
mode.
All
To select All, press the ENTER button to show the
ALL on the display. Use the UP/DOWN button to se-
lect Yes (the unit will run built-in program to reset all
motors to their home positions) or No, press ENTER
button to store. Press MENU button to exit menu
mode.
Special Functions
Enter MENU mode, select Special Functions, press
the ENTER button to confirm, use the UP/DOWN but-
ton to select Fixture Maintenance or Factory Setting.
Fixture Maintenance
To select Fixture Maintenance, press the ENTER but-
Home Position Adjust
In the main functions, hold the ENTER button for at
least 3 seconds into offset mode, use the DOWN/UP
button up to select Pan Offset, Tilt Offset or Zoom
Offset, and press the ENTER button to confirm. Use
ton to show the FIXTURE MAINTENANCE on the dis-
play. Use the UP/DOWN button to select Interval or
Remain Time.
Interval
To select Interval, press the ENTER button to con-
firm, the interval time will be shown on the display.
Press the MENU button to exit.
Remain Time
To select Remain Time, press the ENTER button to
confirm, the remaining time will be shown on the
display. Press the ENTER button to confirm, use the
UP/DOWN button to select Exit or Reset time, press
the MENU button to exit.
Factory Setting
To select Factory Setting, press the ENTER button
to show the FACTORY SETTING on the display. Press
the ENTER button to confirm, use the UP/DOWN but-
ton to select No or Yes (the fixture will reset to facto-
ry settings and exit menu mode).
the DOWN/UP button to adjust the home position of
the Pan, Tilt or Zoom, Once the position has been
selected, press the ENTER button to setup, to go
back to the functions without any change press the
English Version - Tecshow Halo 740 XL
P. 9