Making Ice Cubes - Unold 48955 Instrucciones De Uso

MAKING ICE CUBES

1. Caution: Do not use the first ice
cubes that have been produced
with the appliance. Dispose of
these ice cubes; they may contain
production residues.
2. Prepare the
described in the section "Before
using the appliance the first
time".
3. Remove the ice container (4)
from the appliance by pulling it
forward.
4. Fill the provided measuring cup
with fresh, clean water.
5. Pour the water into the water
tank (see illustration). At least a
maximum of 1.8 litres must be
filled into the appliance. Please
pay attention to the respective
minimum and maximum mark on
the left side of the water tank.
6. Do not fill water past the Max
marking to prevent water from
running out.
7. Slide the ice container back into
the appliance.
30
appliance as
8. Press the On button to start
making ice cubes immediately.
If you have activated the timer,
you do not need to press any
button; the appliance will start
automatically at the specified
time.
9. The appliance starts to make ice
cubes. The first ice cubes that are
made do not have the selected
size, since it takes several minutes
before the appliance reaches
the right operating temperature.
Therefore, the first ice cubes are
somewhat smaller.
10. If the pump in the appliance
should not transport any water
for a longer period of time, switch
off the appliance, and allow a few
drops of water to drip out via the
residual drain. Then restart the
process.
11. Depending on water and ambient
temperature the ice cubes will be
ready in approx. 6 to 18 minutes.
Note: At the beginning of ice cube
making process, for technical
reasons the ice cubes are still
small and of different sizes.
12. You can interrupt the making of
ice cubes any time by pressing
the „OFF" button.
13. If you have programmed the
appliance via the timer, you do
not need to press any button, the