Mounting The Dh-19 To The 100/200 Series Winch - Sperian Miller DURAHOIST Serie Instrucciones De Uso

7.2 100/200 Series Winch
Bracket Assembly & Installation

7.2.3 Mounting the DH-19 to the 100/200 Series Winch

1
Remove bolt and thumb screw from
100/200 Series Winch. Properly
dispose of bolt, as it will not be
needed. If you are planning on
mounting the DH-19 to a 200 Series
Winch, save the washer.
2
Position the DH-19 so that the
bottom bolt is inserted into the top
slot on the back of your 100/200
Series Winch.
3
If you are mounting the DH-19 to a
100 Series Winch, insert the top bolt
into the corresponding hole (3A). If
you are mounting to a 200 Series
Winch, you will need to use the
provided washer as a spacer (3B).
USE R I NS TR UC TIO N S - E N G LIS H
4
5
5a
5b
3a
23
3b