Assembly & Adjustments Of Mast & Base - Sperian Miller DURAHOIST Serie Instrucciones De Uso

5.0 Assembly and Adjustments of Mast & Base
Assembling The DH-3 Mast
Before using the mast, make sure your mast offset is compatible with base/mounting option you
intend to use. See page 12 for offset information.
1
Start by applying mast to
base of your choice.
2
Move mast arm in an
upward fashion towards
open section above post.
3
Secure by inserting pin
through hole sets.
Assembling the DH-4 Base
1
Remove all parts from
storage/transport bags,
containers, etc. and lay out
on the ground as shown.
2
Insert leg sleeve into base
center section. Overall width
of base may be adjusted by
selecting different hole sets in
the leg sleeve and installing
the pins.
USE R I N S TR U C TIO N S - E N G L I SH
D
A
B
Leg Sleeve
Level Indicator
(Also applies with DH-1 and DH-2 systems)
1
2 2 2
3
4
(Also applies with DH-1 and DH-2 systems)
G
A
C D
Tri-Screw Adjuster Screw
10
F
C
B
E
E F
Leg Pin
Leg Tube
G
Base Center