Cleaning And Care; Drive Unit; Splash Guard; Stainless Steel Blade - WMF KULT X Instrucciones De Uso

Start-up
Please clean all the parts as described in the section "Cleaning and Care" before
these come into contact with food.
▪ Carefully remove the protective cover from the stainless steel blade (4) and
place the stainless steel blade (4) into the slot at the bottom of the container
(5). If necessary, twist the stainless blade (4) slightly until it slides downwards.
Caution: The blade is sharp. For this reason, always attach the protective cover
when not working with the blade.
▪ Insert the food, cover the container (5) with the splash guard (3). Insert the
food into the container (5) but not past the MAX mark.
▪ Attach the drive unit (2) and turn this until it locks into the splash guard (3).
After inserting the mains plug, press down the desired start button (1) several
times in short bursts until the desired results are achieved.
▪ You must wait until the stainless steel blade (4) has come to a standstill before
removing the protective cover (3).
Safety function
The processor's motor will only start when the drive unit (2) is correctly fitted.
Do not remove the drive unit (2) while the device is operating.

Cleaning and Care

Remove the mains plug after use. Never immerse the drive unit (2) in water,
simply wipe it with a damp cloth. Do not use any abrasive cleaning agents. Take
care when cleaning that you do not injure yourself on the sharp blade (4). Food
residues could get into the blade slot. Remove this after each use.

Drive unit (2)

Splash guard (3)

Stainless steel
blade (4)

Glass container (5)

10
can be rinsed
dishwasher safe
under running
water
wipe with a
damp cloth