Preparation; Installing The Charger; Charging The Batteries - exonda OC20 Manual De Instrucciones

Preparation

Installing the charger

1. Place the power cable such that nobody stumbles over it.
2. Keep the cables away from hot surfaces.

Charging the batteries

This device includes a modern Li-ion-battery featuring an especially high
capacity with low weight.
It does not have any "Memory effect" and has longer durability if handled
properly.
The device is not ready for battery operation at the time of delivery.
Charge the device for 2 hours before using it for the first time. Thereafter the
normal charging time is 1 hour. LED charge level indicator [6] lights up
constantly depending on the charging status during operation and charging.
Notice
1. Check conformability between the mains voltage on the nameplate of the
plug-in power supply unit [1] and the available current.
2. Insert the plug-in power supply unit into the socket and the plug [4] of the
plug-in power supply unit into the socket of the charger [2].
3. Place the device in the charger [11]
•
You can also charge the device, in which you insert the power cable of the
plug-in power supply unit directly into the charging socket of the device [9].
Colours of the LED charge level indicator [6] display the charging status:
Colour
Red
Yellow
Green
Preparation
Notice
Charging status
The battery has drained.
Battery has discharged partially.
Battery is full.
21