Oiling The Knife Head; Cleaning The Contacts; Storing - exonda OC20 Manual De Instrucciones

Oiling the knife head

The knife head must be oiled daily at the toothing and the contact surface [C].
1. Before oiling, remove hair residue using a cleaning brush.
2. Use only supplied oil [14].
You can reorder oil from service (see reverse page of this manual).
When oiling the OC20B model, pay attention that oil does not penetrate
between the housing and the LED light [3].

Cleaning the contacts

Charging may be interrupted or impaired if the contacts [9] on the device, on
the charger or on the connector [4] of the plug-in power supply unit [1] are
soiled.
1. Clean the contacts using a cloth moistened with alcohol or spirit.
2. Dry the contacts.
Use only a charger [11] with dry and clean contacts.
Notice

Storing

If you do not wish to use the device for a longer period, store it only in the
charged state.
Storage should be in a cool, dry and frost-free place (optimally 15 °C).
This prevents premature aging of the battery.
Do not wind the power cable around the device as it can break.
Cleaning, maintaining, storing
23