Operation; Adjusting The Cutting Length; Switching The Device On And Off; Cleaning, Maintaining, Storing - exonda OC20 Manual De Instrucciones

Operation

Operation

Adjusting the cutting length

With comb attachment
Insert the desired comb attachment [15] on the knife head. Use only original
accessories!
You can get the best cutting results in combination with the comb attachment
in level 1 (0.5 mm) of the cutting length adjustment.
With the knife head
Cutting length of the knife head can be adjusted in 4 levels from 0.5 to 2.5 mm.
Adjust the desired cutting length using the lever [7] on the underside of the
device.

Switching the device on and off

Actuate the on/off button [6].
Model OC20B
In the OC20B model, LED light [3] for cutting switches on/off automatically.
22

Cleaning, maintaining, storing

Cleaning the device

1. Using a damp cloth, wipe the device from time to time.
2. Then rub it dry.

Cleaning the knife head

To avoid increased wear of the knife head and motor, the knife head must be
cleaned at regular intervals and oiled at appropriate locations.
In case of regular use, clean and oil the knife head thoroughly once daily:
1.
Switch off the device.
2. Using the cleaning brush, remove hair carefully.
3. Detach the knife head [16] at regular intervals, to remove hair residue from
the insides of the device.
4. Press against the knife head from the top and detach it from the
device [A].
5. Press the top and bottom knife slightly away from each other [B] and using
the cleaning brush [13] remove hair between the inserts.