6.2 Taking off the prosthesis
1) Unroll the sealing sleeve from the thigh onto the prosthetic socket.
2) Pull the residual limb and liner out of the prosthetic socket.
7 Cleaning
CAUTION
Reuse on other patients and improper cleaning
Skin irritation, formation of eczema or infections due to contamination with
germs
► Only use the product for a single patient.
► Clean the product regularly.
Dirt in the prosthetic socket can impair the function of the Dynamic Vacuum
System.
1) Rinse the product with clear fresh water.
2) Dry the product with a soft cloth.
3) Allow to air dry in order to remove residual moisture.
8 Maintenance
► The prosthetic components should be inspected after the first 30 days of
use.
► Inspect the entire prosthesis for wear during normal consultations.
► Conduct annual safety inspections.
► To lubricate the cylinder or piston seal, use Polylub GLY 801.
9 Legal Information
All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
9.1 Liability
The manufacturer will only assume liability if the product is used in accord
ance with the descriptions and instructions provided in this document. The
manufacturer will not assume liability for damage caused by disregard of this
document, particularly due to improper use or unauthorised modification of
the product.
9.2 CE Conformity
This product meets the requirements of the European Directive 93/42/EEC
for medical devices. This product has been classified as a class I device
according to the classification criteria outlined in Annex IX of the directive.
Ottobock | 29