Panasonic EY7880 Manual De Instrucciones página 13

Dust Collection Cup (EY9X004E)
* Drill bits of which diameter is 20 mm
above cannot be inserted through
dust collection cup.
* Do not use the tool for cutting other
than concrete, mortar and other ceram-
ic materials. If used for cutting metal
materials, the dust collection cup may
be damaged by the metal chip heat.
1. Install a dril bit.
2. Pass the drill bit through A and fix
the cup at B by matching with the
shape of the support handle.
Operation
Keep the dust collection cup in close
contact with the wall surface during
operation.
Removal
Hold the base of the dust collection
cup for removal.
Please remove after thoroughly get-
ting rid of the dust in the dust collec-
tion cup.
A B
Base
Storage
Do not store the dust collection cup
in a compressed position. If kept in
a compressed position, it may be
impossible to return to the original
shape.
. MAINTENANCE
Use only a dry, soft cloth for wiping
the unit. Do not use a damp cloth,
thinner, benzine, or other volatile sol-
vents for cleaning.
. ACCESSORIES
CAUTION:
To prevent the risk of injury, only use
accessory or attachment for its stat-
ed purpose.
Dust Collection Cup
•EY9X004E
Drill chuck
•EY9HX400E
Hammer chuck
•EY9HX401E
Chisel Attachment
•EY9HX402E
If you need any assistance for more
details regarding these accessories,
ask your local service center.
- 13 -