9. Do not allow unauthorised personnel near the machine.
• Do not allow the main unit or the power supply cable to be touched and do not allow
unauthorised personnel to operate the machine.
• Do not allow unauthorised personnel to enter the workplace, especially children. Injuries
could occur.
10. Do not use the machine with force.
• Only use the machine for the designated purpose. Work according to the capacity of the main
unit in order to guarantee safe and efficient operation. Excessive force could not only damage
the product but also cause accidents.
• Do not use the machine in any way that could cause the motor to lock or cause smoke or fire.
11. Wear close-fitting clothing.
• Do not wear ties, garments with open sleeves, loose garments, accessories such as necklaces,
etc., which could get caught in rotating parts.
• When working outside it is recommended to use rubber gloves and shoes with studs. Slippery
gloves and footwear can lead to injuries.
• Cover long hair with a cap or net to prevent it from becoming caught in rotating parts.
• Wear a safety helmet, safety footwear, etc. in accordance with the working environment.
12. Do not work in an unnatural posture.
• Keep a firm footing and balance to avoid falling and injury.
13. Remove tools such as spanners.
• Before putting the switch to the ON position, check that the inspection and adjustment tools
have been removed.
• The operation of the machine whilst tools are inside could cause accidents and injury.
14. Operate the machine with extreme care.
• Always work by paying great attention to the handling of the machine, the working methods
and the surrounding conditions. Carelessness could result in accidents and injury.
• Do not work with the machine if you have low concentration levels such as when you are
tired, after consuming alcohol, whilst ill, under the effects of medication, etc.
15. Do not handle the power supply cable inappropriately.
• Do not carry the product by the cable or pull on the cable to disconnect it.
• Do not place the cable close to hot objects, grease and oils, scissors or sharp objects.
• Do not stand on the cable, pull it or apply excessive force which could damage it. This could
cause an electric shock or short-circuit leading to fires.
SAFETY
WARNING
!
ENGLISH
21