Rothenberger RO-GROOVER Instrucciones De Uso página 20

1. Use the correct voltage.
• Use the voltage indicated on the equipment nameplate or in the manual. If the supply voltage is
different from the voltage indicated overheating, smoke or fire could result.
2. Verify that the switch is in the OFF position before inserting the plug in the electric power supply
socket.
• If the plug is inserted in the power supply socket in the ON position the machine could start up
unexpectedly and cause an accident. Ensure that the switch is in the OFF position.
3. Avoid electric shocks.
• Do not touch the plug with wet hands.
• Do not use the machine in the rain or in areas where the machine could get wet.
• Earth the machine to avoid electric shocks.
4. Take into account the conditions in the workplace.
• Do not use the machine in the rain, in wet areas or in areas where the machine could get wet
easily. Moisture could impair the motor insulation and result in electric shocks.
• Do not use the machine near liquids or flammable gases such as petrol and solvents. Fire or
explosions could result.
5. Use the specified accessories and attachments.
• Do not use accessories or attachments other than those specified in the instruction manual or in
our catalogues. Accidents or injuries could result.
6. Turn the main unit to the OFF position and disconnect the plug from the power supply socket in the
following cases.
• When the machine is not being used or when parts are being changed, repaired, cleaned or
inspected.
• When the accessories are being changed.
• When swarf or other foreign bodies are being removed.
• When connecting the plug, the main unit could start up unexpectedly and cause an accident.
7. If any anomaly is detected stop the machine immediately.
• When the machine does not operate smoothly or if any anomalies such as odours, vibrations or
unusual noises are detected stop the machine immediately.
• Check the symptoms for each item in the section entitled, "Possible causes of malfunctions" at
the end of this manual and follow the relevant instructions. Continued use of the machine can
lead to overheating, smoke or fire which could cause accidents or injury.
• If overheating occurs, or if smoke is produced by the machine, do not try to repair the machine
yourself and request inspection and repair.
8. Keep the workplace clean.
• Ensure that the work table and the workplace are in good condition and well lit.
• An untidy workplace and work table can cause accidents.
20
SAFETY
WARNING
!
ENGLISH