Error Information - TECshow RAZOR 7R BEAM Manual De Usuario

6.4. Error Information Lamp Startup Fail
It appears when there is no lamp or some wires are damaged.
Temperature Sense Error
It appears when temperature check board is damaged.
Lamp Too Hot Power Off
It appears when temperature is detected higher than 110°C.
Check if the unit is properly ventilated, or fans or tempera-
ture check board may is damaged.
Lamp Too Hot Low Power
It appears when temperature is detected higher than 105°C.
the unit will run on a low power level.
Maintenance Fixture
It appears when the maintenance remaining time becomes
0S, please enter menu mode and reset the time.
Lamp On Over 700 Hour
It appears when the lamp has been on over 700 hours, please
turn off the lamp.
Memory Initial Fail
It appears when the memory IC is damaged.
CPU-B Error, CPU-C Error, CPU-D Error
They appear when board P.C or some wires are damaged.
Pan Reset Error, Pan Encode Error, Tilt Reset Error, Tilt Encode
Error, Shutter Reset Fail, Dimmer Reset Fail, Color Reset Fail, ,
Gobo Reset Fail, , , and Frost Reset Fail They may appear when
turning on or resetting the unit, for some parts such as board
P.C are damaged. Please contact the qualified maintenance.
RAZOR 7R BEAM
ENGLISH VERSION
p. 16