Starting Current Limitation - Hilti AG 230-20D Manual De Uso

3 Description
3.1 Product overview
3.2 Intended use
The product described is a hand-held electric angle grinder. It is designed for cutting and grinding metallic
materials without use of water. It can be used only for dry grinding / cutting.
The tool may be operated only when connected to a power source providing a voltage and frequency in
compliance with the information given on the type identification plate.
3.3 Items supplied
Angle grinder, guard, side handle, clamping flange, clamping nut, pin wrench and operating instructions.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.group
3.4

Starting current limitation

The electronic starting current limiter reduces the starting current drawn by the power tool and thus prevents
the mains fuse blowing. It also allows the power tool to start smoothly, without a jolt.
4 Consumables
For working metal, use only synthetic resin-bonded, fiber-reinforced grinding discs or cutting discs approved
for use at a permissible peripheral speed of 80 m/sec.
Use only grinding discs approved for use at a rotational speed of at least 6500 rpm and having a maximum
diameter of 230 mm.
The maximum disc thickness is:
• 6.4 mm for grinding discs
• 2.5 mm for cutting discs.
ATTENTION! When cutting or slitting with abrasive cutting discs always use the guard with cover plate, or a
fully enclosing dust hood.
18 English
1
Arbor lockbutton
@
Steadying rib
;
On/off switch
=
Safety trigger
%
Side handle
&
Threaded socket for grip
(
Arbor
)
Keyed locating lug
+
Clamping lever
§
Clamping flange
/
Clamping nut
:
Adjusting screw
∙
Guard
$
Grinding disc
£
Pin wrench
|
2121808
*2121808*