Chicco Polly 2in1 Instrucciones De Uso página 23

gram 1A - diagram 1B). WARNING: the ends of the front and rear
at
legs have a different shape to avoid errors in the assembly phase.
t-
Rear legs: keep the two locking buttons, located at the base of the
ty
frame, pressed down and insert the legs into the structure. The
n-
parts are locked only when the two locking buttons come out from
the holes on the legs, and an audible click is heard, signalling that
ly
the legs are securely fitted (diagram 1A).
ee
Front legs: keep the two locking buttons located at the base of the
ir.
frame pressed down and insert the legs. The parts are correctly
l-
locked only when the two locking buttons come out from the holes
on the legs, and an audible click is heard, signalling that the legs are
securely fitted (diagram 1B).
ir,
2. Stand at the back of the Highchair and hold the two joints, then
press the open/close buttons. At the same time, open the Highchair
legs using your foot, until an audible click is heard, signalling that
re
the legs are locked in the open position (diagram 2).
to
3. Raise the seat by holding the upper part of the backrest and
a-
pull it upward, until the desired height is reached (diagram 3). The
Highchair can be adjusted to 7 height positions.
nt
4. Lower the seat and leg rest with your hands (diagram 4). The seat
it
is fixed to the frame by a fastening device.
5. Press the side adjustment buttons and lower the leg rest in a
e.
vertical position (diagram 5).
6. Lower the armrests by pressing the two buttons located at the
ng
rear of the armrests (diagram 6).
he
WARNING: The armrests must always be maintained in a horizon-
tal position. The armrests can be maintained in a vertical position
e,
only when closing the Highchair.
7. Fix the fabric covers to the Highchair frame:
o-
Polly Version Easy:
er
A. Fit the fabric cover to the Highchair frame by sliding the safety
harness and D-Rings into the appropriate loops (diagram 7A).
he
B. Insert the clips into the buckle (diagram 7B).
C. Fit the spring catches (diagram 7C).
Polly Double Phase Version:
p-
D. Fit the upper fabric cover to the Highchair frame by sliding the
safety harness and D-Rings in the appropriate loops (diagram 7D).
E. Insert the clips into the buckle (diagram 7E).
8. Insert the footrest, turn it until the use position is reached, and
ar-
lock it (diagram 8). The footrest can be adjusted to 3 positions.
The child can now be seated in the Highchair.
9. Fit the rigid crotch strap to the activity tray (diagram 9A, dia-
gram 9B). The design of the crotch strap attachment only allows
er-
one type of assembly operation.
he
WARNING: IMPORTANT FOR YOUR CHILD'S SAFETY - Always fit
he
the rigid crotch strap to the activity tray before fitting the tray to
ase
the Highchair. Once the rigid crotch strap has been fitted, it must
he
never be removed.
ed
The activity tray can now be fitted to the Highchair.
The Polly Easy Highchair version comes with a single padded cover,
rts
while the Polly Double Phase version has a double padded cover.
The fabric covers of both Highchair versions are padded, and can be
removed and washed.
To remove the cover from the Highchair, repeat, in the reverse order,
the operations described to fit the fabric cover to the frame (Polly
he
Easy: 7A-7C version, Polly Double Phase version: 7D-7E). With the
ng
Polly Double Phase version, the same operations carried out with the
upper padding must be carried out also with the lower padding.
ne
WARNING: Never use the highchair without the fabric cover.
WARNING: When using the Polly Double Phase Highchair, never
use the Highchair only with the upper fabric cover or with the pad-
ding fitted to the frame in the reverse order.
ld,
ese
nto WARNING: The use of the safety harness and fabric crotch strap is
necessary to guarantee the safety of your child. WARNING: The ac-
tivity tray alone does not guarantee the safety of your child. Always
ia-
FABRIC COVER
SAFETY HARNESS
use the SAFETY HARNESS!
The highchair has a 5-point safety harness.
10. Release the safety harness (diagram 10).
11. Place the child in the highchair and fasten it with the safety
harness (diagram 11).
The safety harness can be adjusted to two height positions.
FITTING / ADJUSTING THE ACTIVITY TRAY
WARNING: IMPORTANT FOR YOUR CHILD'S SAFETY - Always fit
the rigid crotch strap to the activity tray before fitting the tray to
the Highchair. Once the rigid crotch strap has been fitted, it must
never be removed.
The activity tray can now be fitted to the Highchair.
The activity tray can be adjusted to 4 positions.
12. Hold the activity tray in your hands (diagram 12).
13. Press and hold the bottom button (X), lower the activity tray
into place checking that the armrests (H) slot into the guides lo-
cated under the activity tray (diagram 13).
14. Move the activity tray until the desired position is reached and
release the button. If the activity tray is not automatically locked
on the armrests, move the activity tray until a click is heard, signal-
ling that the tray is locked (diagram 14).
WARNING: Always ensure that the tray is locked correctly to the
armrests before use.
WARNING: Never leave the tray fitted in a position in which the
danger signs are visible on the armrests: IT IS NOT safe!
15. To remove the tray, pull it in an outward direction while keeping
the lower button pressed.
ACTIVITY TRAY COVER (ONLY FOR POLLY 2 IN 1)
16. The Highchair has an activity tray cover. This can be fixed /
removed from the activity tray by a pressure device (diagram 15).
WARNING: Always ensure that the activity tray cover is correctly
fitted to the tray during use.
17. The activity tray cover can be used as a convenient "table cloth
saving tray" if the child eats sitting directly at the table with its
parents (diagram 16).
ADJUSTING THE HEIGHT OF THE HIGHCHAIR
The Highchair can be adjusted to 7 height positions.
18. To raise the seat: Hold the upper part of the backrest and pull it
upward, until the desired height is reached (diagram 17).
19. To lower the seat: Press the two side buttons simultaneously
and lower the seat, until the desired height is reached (diagram 18).
WARNING: Do not carry out this operation with the child sitting
in the Highchair.
RECLINING BACKREST ADJUSTMENT
The backrest of the Highchair can be adjusted to 3 positions.
20. To adjust the inclination of the backrest, press the button
located at the rear top, recline the backrest until the desired po-
sition is reached and release the button, the backrest will lock
automatically and an audible click is heard, signalling that it is
locked into position (diagram 19). The operation can be carried
out also with the child sitting in the Highchair, although it can
be more difficult.
The leg rest of the Highchair can be adjusted to 3 positions.
21. Press the two side adjustment buttons and recline the leg rest,
until the desired position is reached (diagram 20).
FOOTREST
The footrest of the Highchair can be adjusted to 3 height positions.
22. From the use position, turn the footrest until it is parallel to the
leg rest, and unlock it (diagram 21).
23. Remove the footrest and fit it at the desired height (diagram 22).
24. Turn the footrest until the new desired use position is obtained,
and lock it into position (diagram 23).
23
LEG REST