Installation of the Pop-up Drain with Cable
1) Apply pipe tape to the threads of the drain body.
2) Insert the drain body into the drain hole of the lavatory.
3) Assemble the gasket, flange nut and lock nut to the
drain body.
4) Apply pipe tape to the end threads of the drain body
and fasten the tail piece.
NO TE: Make sure that the cable faces towards the
faucet.
5) Connect the cable base connector with the cable handle
connector.
Press the
Cable Handle
clip to be
Connector
able to
Clip
connect
Cable Base
Cable
Connector
Groove, to
which the
connection is
to be made.
Clip
Your new faucet is designed for years of trouble-free performance. Keep it
looking new by cleaning it periodically with mild soap, rinsing thoroughly
with warm water and drying with a clean, soft cloth. Do not use abrasive
cleaners, steel wool or harsh chemicals, as these will dull the finish. Failure
to follow these instructions may void your warranty.
Cleaning the Drain
1) To clean the drain, first push the drain lever down to open the drain.
2) Unscrew the pop-up and remove it from the drain.
3) Use a cleaning utensil such as a small brush to clean the pop-up.
Open
Pop-up
(For TL170SD/TL170SDLQ only)
Faucet
Drain
Handle
Lever
Drain Body
U-cup Seal
Tailpiece
CARE & CLEANING
Push
Drain Lever
Drain
Body
Drain Lever
Cable Handle
Pop-up
Connector
Cable Base
Drain
Connector
Seal
Nut
Cable
Pop-up
Unscrew
5
Flange
Drain Body
Lock Nut
Drain Gasket
Flange Nut
Lavatory
Drain Body
Lock Nut
Tailpiece
Small
Brush
Cable
Pop-
up