Consignes Générales De Sécurité - Virutex SR165 Manual De Instrucciones

can be connected together our standard dust collection
attachment ref. 6446073 (2.25 m) or 1746245 (5 m) (op-
tional accessories) to our dust collectors AS182K, AS282K,
ASM582T, ASC682 or to any industrial dust collection system.
CAUTION: Always use a dust collector designed in accordance
with the applicable guidelines on sawdust emission.
11. MAINTENANCE
Always unplug the machine before carrying
out any work on it.
- Checking the saw blade. Deposits of resin and glue on the
saw blade cause inefficient cutting. To avoid them, always
clean the blade immediately after use.
- Inspect the mounting screws. Regularly inspect all the
mounting screws and ensure they are firmly tightened.
Should any screw be loose, tighten it immediately. Failure
to do so could put you at serious risk.
- Motor maintenance. Always take the greatest care over
this and make sure that the motor winding is not damaged
and does not become wet with oil or water.
- The vents should always be kept clean and free of obstacles.
- Clean the machine thoroughly after each use. Blast the
motor regularly with compressed air.
- Check that the mains cord is in good condition. If it is not,
take it to a Virutex official service centre to have it replaced.
- Brush replacement. Brushes must be replaced when length
reaches 8 mm or less. To do so, please contact an authorized
after sales service center.
We recommend that every two carbon brushes replacement
in our services centres you also order a general maintenance
(cleaning and lubrication).
- Use only Virutex accessories and spares. Parts the changing
of which is not showed in this instruction manual, should
be replaced in a Virutex official service centre.
12. NOISE AND VIBRATION LEVEL
The noise and vibration levels of this device have been mea-
sured in accordance with European standard EN60745-2-5
and EN 60745-1 and serve as a basis for comparison with
other machines with similar applications.
The indicated vibration level has been determined for the
device's main applications and may be used as an initial value
for evaluating the risk presented by exposure to vibrations.
However, vibrations may reach levels that are quite different
from the declared value under other application conditions,
with other tools or with insufficient maintenance of the
electrical device or its accessories, reaching a much higher
value as a result of the work cycle or the manner in which
the electrical device is used.
Therefore, it is necessary to establish safety measures to
protect the user from the effects of vibrations, such as
maintaining both the device and its tools in perfect con-
dition and organising the duration of work cycles (such as
operating times when the machine is subjected to loads,
and operating times when working with no-load, in effect,
12
not in use, as reducing the latter may have a considerable
effect upon the overall exposure value).
13. WARRANTY
All VIRUTEX power tools are guaranteed for 12 months
from the date of purchase, excluding any damage which is
a result of incorrect use or of natural wear and tear on the
machine. All repairs should be carried out by the official
VIRUTEX technical assistance service.
14. RECYCLING ELECTRICAL EQUIPMENT
Never dispose of electrical equipment with domestic waste.
Recycle equipment, accessories and packaging in ways that
minimise any adverse effect on the environment. Comply
with the current regulations in your country.
Applicable in the European Union and in European countries
with selective waste collection systems:
If this symbol appears on the product or in the accompanying
information, at the end of the product's useful life it must
not be disposed of with other domestic waste.
In accordance with European Directive 2002/96/EC, users
may contact the establishment where they purchased the
product or the relevant local authority to find out where
and how they can take the product for environmentally
friendly and safe recycling.
VIRUTEX reserves the right to modify its products without
prior notice.
F R A N Ç A I S
SCIE CIRCULAIRE SR165
Attention
N'approchez pas les mains à la zone de coupe
et de la lame. Gardez la deuxième main sur
la poignée auxiliaire ou sur le boîtier du
moteur. Si les deux mains tiennent la scie,
elles ne peuvent pas être coupées par la lame.
1. CONSIGNES DE SÉCURITÉ
1.1 CONSIGNES GÉNÉRALES DE SÉCURITÉ
Avant d'utiliser la machine, lisez attentive-
ment ce MANUEL D'INSTRUCTIONS. Assurez-
vous de bien avoir tout compris avant de
commencer à travailler sur la machine.