Tabla de contenido
Idiomas disponibles
Idiomas disponibles
KNOW YOUR PRESSURE
WASHER
Read this owner's
manual and safety rules before operating your cleaning
system.
Compare the illustrations with your cleaning system to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Spray Gun
Chemical Reservoirs
Spray Tips
High Pressure Hose
RecoJJStarter ,_
Fuel Tank
Nozzle Extension with
Quick Connect
Hose Reel
Oil FiJJCap
Air FiJter
ThrottJe Lever
Choke Lever
Water inlet
High Pressure Outlet
Pump equipped with
Automatic Cool Down System
Air Filter = Protects engine by filtering dust and debris
out of intake air.
Automatic
Cool Down System -- Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
Chemical
Reservoirs
= Used to provide detergent or
other chemicals to the low pressure water stream.
Choke Lever -- Prepares a cold engine for starting.
Fuel Tank -- Fill tank with regular unleaded fuek Always
leave room for fuel expansion.
High Pressure Hose -- Connect one end to the water
pump and the other end to the spray gun.
High Pressure Outlet -- To connect high pressure hose.
Hose Reem-- Used for storing hose while unit is not in
use. Hose must be detached from pump and spray
gun before storage.
Nozzle Extension with Quick Connect -- Allows you to
switch between four different spray nozzles.
Oit Fill Cap -- Fill engine with oil here. See page 7 for
oil recommendations
and filling instructions.
Pump -- Develops high pressure.
Recoil Starter -- Use for starting the engine manually.
Spray Gun -- Controls the application of water onto
cleaning surface with trigger device. Includes safety
latch.
Spray Tips -- Chemical injection, 0°, 15°, and 40°: for
various high pressure cleaning applications.
Throttle
Lever--Sets
engine in starting mode for
recoil starter and stops a running engine.
Water inlet -- Connect garden hose here=
Tabla de contenido
