Menu System; Touch Sensor Tone; Manual Clock Adjustment; Synchronize Clock - Kenwood KRC-394 Manual De Instrucciones

Menu system

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.
Display
"BEEP ON"
"BEEP OFF"

Manual Clock Adjustment

This adjustment can be done when the <Synchronize Clock> (page
20) is set as OFF.
1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "CLK ADJ" display.
2
Enter Clock Adjust mode
Press the [4] or [¢] button for at least 2 seconds.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit Clock adjustment mode
Press the [MENU] button.

Synchronize Clock

Synchronizing the RDS station time data and this unit's clock.
Display
"SYNC ON"
"SYNC OFF"
Setting
Beep is heard.
Beep canceled.
Function of the KRC-391/36/394/37
Setting
Synchronizes the time.
Adjust the time manually.
It takes 3 to 4 minutes to synchronize the clock.

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves.
Display
"DSI ON"
"DSI OFF"

Selectable Illumination

Selecting the button illumination color as green or red.
Display
"COL GRN"
"COL RED"

News Bulletin with Timeout Setting

It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Display and Setting
"NEWS OFF"
"NEWS 00M"
"NEWS 90M"
When "NEWS 00M" — "NEWS 90M" is set, the News Bulletin
Interrupt function is ON.
— 20 —
Setting
LED flashes.
LED OFF.
Setting
The illumination color is green.
The illumination color is red.
Function of the KRC-391/36/394/37